3, 4 & 4.5 CUBIC YARD STAINLESS STEEL SALT & SAND SPREADERS
Ideal for heavy duty municipal and commercial applications

Available in Gas Engine or Hydraulic Drive. Designed for dump bodies & flat bodies with a GVW chassis of 15,000 to 20,000 lbs. and is available with either hydraulic motor drive or 10-1/2 HP gas engine.

General:
• Self-contained hopper.

• Spreads free flowing materials sand and/or salt.
• Spread width of 4' to 30'.

Material Hopper:
• 12 gauge 304 stainless steel with continuously welded seams.
• All hopper sides are formed with a continuous "J" channel profile for added rigidity and strength. Six (6) 12 gauge body gussets.
• Optimum material feed is maintained by hopper side walls sloped at 45°.

• Heavy-duty 4-section hinged top grate is standard. Bars are 1/4" diameter located on 3" center grid.
• Built-in four corner lift points.

Conveyor:
• 12-1/2" wide, all steel pintle chain conveyor with 1/4" x 1" crossbars on 4-5/8" centers.

• Replaceable 10 gauge stainless steel chain shields.
• Replaceable 10 gauge stainless steel conveyor floor.
• 10 gauge stainless steel inverted "V".

• Conveyor driven by 20:1 ratio worm gearbox utilizing tapered bearings.
• Conveyor chain is adjustable for chain take up, providing optimum performance and drive life.

• Chain drive and idler sprockets are 6-tooth cast sprockets keyed to 1-1/4" shafts.
• Conveyor chain wiper minimizes waste.

Spinner Assembly:
• Spinner chute has two adjustable internal baffles.

• Four (4) external baffles (3 adjustable, 1 fixed).

• 18" x 3/4" thick polyurethane spinner disc.

• Hydraulic model's chute utilizes four (4) spring loaded stainless steel quick detach pins for ease of: material unloading, tow hitch access and storage.

• Bolt-on spinner housing minimizes replacement cost.

Power Source:
• Hydraulic Drive: Two independent hydraulic motors (15 GPM @ 1,500 PSI).
• Gas Engine: 10.5 horsepower Briggs & Stratton.

Optional Equipment:
• Nylon strap mounting kit.
• Tailgate latch kit.

• Liquid spray system, electric.
• Stainless steel D.O.T. spreader lightbar.

Dimensions:
• 4 cu. yd. -- Overall length, 108"; Width, 70"; Height, 45"; Recommended Use: dump bodies and flat beds with a GVW chassis of 15,000 to 20,000 lbs.

• 4-1/2 cu. yd. -- Overall length, 120"; Width, 70"; Height, 45"; Recommended Use: dump bodies and flat beds with a GVW chassis of 15,000 to 20,000 lbs.


1400500SS
Description: 4 cu. yd. 108" Stainless Steel Hopper Spreader Kit, Gas Engine, 1,500 lbs.

1400500SSH
Description: 4 cu. yd. 108" Stainless Steel Hopper Spreader Kit, Hydraulic Drive, 1,435 lbs.

1400550SS
Description: 4.5 cu. yd. 120" Stainless Steel Hopper Spreader Kit, Gas Engine, 1,560 lbs.

1400550SSH
Description: 4.5cu. yd. 120" Stainless Steel Hopper Spreader Kit, Hydraulic Drive, 1,500 lbs.