Questions? Get a Free Consultation Shipping Rates Shipping Calculator

Get One!

7, 8, & 9 CUBIC YARD STAINLESS STEEL SALT & SAND SPREADERS
Ideal for heavy duty municipal and commercial applications.

Designed for municipalities and contractors with a minimum 26,000 lbs. GVW chassis.

General:
• Self-contained hopper.
• Spreads free flowing materials sand and/or salt.
• Spread width of 4’ to 40’.

Material Hopper:
• 7-gauge 304 stainless steel cross members.
• 10-gauge 304 stainless steel, long sills with rear enclosure & integral chain shields.

• 10-gauge 304 stainless steel replaceable floor.
• 10-gauge 304 stainless steel sides (continuously welded seams), gussets and rear panel.

• 10-gauge 304 stainless steel front panel.
• Four (4) 5/8” thick lift points.

Feedgate:
• 10-gauge, 304 stainless steel with scaled screw jack adjustment.
• 18-5/8” wide x 10” tall opening.

Conveyor:
• 24" wide, pintle chain conveyor with 3/8” thick x 1-1/2” wide crossbars on 4-1/2” centers (667X Pitch).
• 2" diameter drive shaft with 4-bolt relubeable bearing.

• 8-tooth cast iron sprockets.

• 50:1 or 25:1 direct-drive gearbox with extended through-shaft for ground speed sensor.

• 1-1/2” diameter idler shaft with 4” adjustable range relubeable bearing.
• Conveyor chain wiper made of belted rubber minimizes waste.

Standard Installed Equipment:
• 4-section hinged top grate screens. 3/8" diameter bar on 3" centers with 1/4" x 2" x 2" angle iron frame. Hinged to 6" horizontal crossbeam.
• 10-gauge, 304 stainless steel inverted “V” prevents material compaction and reduces wear on drive train components.

Chute/Spinner Assembly:
• 10-gauge, 304 stainless steel laser cut parts with smooth radius corners.

• Telescopic adjustment in 3” increments to accommodate varying body mounting heights.

• Two (2) adjustable, internal baffles direct material to 20” diameter x 5/8" thick, 6-fin poly spinner disc.
• Three (3) adjustable external and one (1) fixed deflector with overlapping corners provide a precision spread pattern.

• Top-mounted, direct-drive hydraulic spinner motor provides better ground clearance and corrosion protection.

• Two (2) stainless steel spring latches quick release hinged chute for bulk material unloading and convenient ground storage.

Power Source:
• Hydraulic Drive: Two independent direct drive hydraulic motors (17 GPM @ 1,500 PSI).

Optional Equipment:
• Dump Body Tailgate Latch Kit (Part # 3008560).

• DOT Spreader Lightbar (Part # LB8663SST). 8" Tall x 66" Long x 3" Deep stainless steel lightbar includes 9 mounting holes for 4” recessed stop-turn-taillights-strobes and 2-1/2" marker lights.
• Liquid Spray System (Part # LS4), 104 Gallons.
• Tie-Down Kit (Part # 3010548).

Dimensions:
• Hopper length, 120”; Overall length, 143"; Width, 82”
• Recommended use, dump bodies and flat beds with a minimum 26,000 lbs. GVW chassis.


1450757SSH
Description: 7.0 cu. yd. Hyd. Dr. SS Hopper Spreader Kit, 50:1; 2,310 lbs.

1425757SSH
Description: 7.0 cu. yd. Hyd. Dr. SS Hopper Spreader Kit, 25:1; 2,310 lbs.

1450863SSH
Description: 8.3 cu. yd. Hyd. Dr. SS Hopper Spreader Kit, 50:1; 2,457 lbs.

1425863SSH
Description: 8.3 cu. yd. Hyd. Dr. SS Hopper Spreader Kit, 25:1; 2,457 lbs.

1450969SSH
Description: 9.6 cu. yd. Hyd. Dr. SS Hopper Spreader Kit, 50:1; 2,550 lbs.

1425969SSH
Description: 9.6 cu. yd. Hyd. Dr. SS Hopper Spreader Kit, 25:1; 2,550 lbs.

Questions? Get a Free Consultation Shipping Rates Shipping Calculator

Get One!